sample rate

[tschmidt]

Where can a guy find out the sample rate for each service?

[Jerry]

In the Service, the devices are declared with the maximum sample rate for that device (Device1=Base,20). If the sensors are listed without a sample rate, they will use the maximum sample rate. However, the sensors can be set to a slower sample rate by adding that rate to the sensor declaration (LTEN=BASE,LTEN,4). This saves some database size for sensors that do not require that maximum sample rate. See page 151 of the Warrior Field operations Manual.

[yangguotianl]

hello, jerry,what's the unit for this kind of sampling rate in Device and Sensor?

[Jerry]

In each service all of the devices are set to number of samples per foot. For example Device1=Base,20 sets the Base device to 20 samples per foot as the default for all sensors from that device.

[yangguotianl]

Is this still in imperial if I set my warrior system as metric unit?

I also have question about the show units if I record on time:
I record date on time, interactive plot showd data on depth, now 1m is 1s.
When I plot the same data in imperial, 1ft=?seconds ?

Thank you.

[Jerry]

The system keeps track of every thing in feet. Only plots are shown in metric. Seconds are seconds whether you have selected depth as feet or meters.