Creat Surface Sensor

[yangguotianl]

How could I create  multiple surface sensor from DAMUPCI? like LTEN, TVOLT, CCL etc.

Thanks

[Jerry]

Go to the tool editor. You can add sensors to STD or create a new tool containing the sensors. Add the USR Software. Once the USR software is added, you can create multiple sensors.

[yangguotianl]

Thanks Jerry.

I  add usr module to tool STD, and create sensor V9 and V10.

When I load acquisition, pop-up window shows:
No specification for Sensor V9.
STD-USR can't initialize.

Then I could not monitor the Device (CYSTED, BASE or DAMUPCI).

[adamg]

You will have to also add the corresponding sensors to the service in the service editor, similarly to the existing sensors.
So, if you have a new sensor in the STD tool called V1, there should be a corresponding sensor in the service configuration that maps V1 to a device channel, for instance V1=BASE,5 (5th channel from the BASE device like CYSTD).

[yangguotianl]

Thanks, I got.
I need to add the sensor to Service None.