Hello,
Could you please advise what type of encoder and tension signal is required for STIP (CPF) ?
- Which signal does it need for the tension ( eg 0-10 VDC or 4-20 mA)?
- Which voltage level for the encoder? Is it TTL or HTL or Open Collector?
Please help.
Regards,
Tam
The tension input is set up for 4-20ma signal, but with a slight modification to the USB44 board, it will work with a 0-10V signal. The encoder inputs have pull up resistors that feed into a 4050 level translator, so almost any encoder input will work. We recommend the BEI H20EB.
Hi, I wan to know the part No, of 7 pin (Encoder) and 5 pin (Tension) connectors.
Can any body help for this?