News:

Welcome to Scientific Data Systems Support Forum!
You are welcome to browse the forum. However, you will need to register in order post or reply topics in this forum. Registration is free and only take 1 minute to complete the registration process.

Main Menu

Line Overspeed

Started by blafleur, October 01, 2008, 02:57:59 PM

Previous topic - Next topic

blafleur


Is there a manual to troubleshoot any "Line Overspeed" problems?

nvv

#1
There 2 methods to deal with Line Overspeed.
1. Control the setting parameters via the hardware (the depth panel).
Press the SP ALM(button #1) of the DEPTH 2 / LINE SPEED METER on the depth panel.
Enter the preset alarm speed value.

2. Control the setting parameters via Warrior Software.
Connect the USB cable from the depth panel to the USB Ports on the back of the tool interface panel.
Open Acquisition, click Control on the depth box. Select USB Depth Panel Type from the drop down list. Click on the Connect button, then click Config button. You can enter the preset alarm speed value box.




[attachment deleted by admin]