News:

Welcome to Scientific Data Systems Support Forum!
You are welcome to browse the forum. However, you will need to register in order post or reply topics in this forum. Registration is free and only take 1 minute to complete the registration process.

Main Menu

Warrior Closing

Started by tschmidt, February 25, 2011, 01:37:19 PM

Previous topic - Next topic

tschmidt

We have three computers, one running Vista and the other two running W7, that will quit running the Warrior software, with the message "Warrior has encountered a problem and needs to close".  I have reinstalled the Warrior software (100816) on the one system and it ran successfully for 20,000' on a simulated log.  I then went to do a calibration and it then gave me the same error.  So I am back to the same problem.  This is a catastrophic error, as you have to restart the OS to get Warrior to start correctly, again.  Any one out there have any comments?

Jerry

Not much information here. Is it a particular service or a particular tool type?

tschmidt

XIPE caliper is the selected service, when the problem is encountered.

adamg

Has this issue been resolved?

tschmidt

Sort of.  We have a couple of computers that will still display the problem, occasionally.  No pattern to it.