Warrior System Support Forum

Warrior Hardware Support => Warrior Hardware General Support => Topic started by: RossRolled on June 15, 2014, 09:52:13 PM

Title: Specs for tension input STIP
Post by: RossRolled on June 15, 2014, 09:52:13 PM
Hey,

looking for information on specifications for the tension input military type plug in the STIP, type, dimensions, that sort of thing.

I am looking to splice in tension from a Lee Specialties straight line counter head. 
Title: Re: Specs for tension input STIP
Post by: Jerry on June 16, 2014, 11:25:50 AM
Panel is shipped to run with a 4-20ma input although modifications to the USB44 will let it run on a 0-10VDC input.
A - Signal return
B- signal input
D- +15V to power transduced
E-  Signal Ground ( A tied to E if panel is supplying voltage for current loop)
Title: Re: Specs for tension input STIP
Post by: holgleos on October 06, 2018, 01:17:33 PM
what is the modification for use 0-10V
Title: Re: Specs for tension input STIP
Post by: boutkan on October 11, 2018, 08:49:02 AM
If you have a 0-5 or 0-10 vdc input for tension the easiest way to bring it in is to use the AUX 1 BNC connector on the rear of the panel and change your Channel input to 6. LTEN=BASE,6
To use the tension connector you must  modify the USB 44 board, remove R14 and R19