News:

Welcome to Scientific Data Systems Support Forum!
You are welcome to browse the forum. However, you will need to register in order post or reply topics in this forum. Registration is free and only take 1 minute to complete the registration process.

Main Menu

Specs for tension input STIP

Started by RossRolled, June 15, 2014, 09:52:13 PM

Previous topic - Next topic

RossRolled

Hey,

looking for information on specifications for the tension input military type plug in the STIP, type, dimensions, that sort of thing.

I am looking to splice in tension from a Lee Specialties straight line counter head. 

Jerry

Panel is shipped to run with a 4-20ma input although modifications to the USB44 will let it run on a 0-10VDC input.
A - Signal return
B- signal input
D- +15V to power transduced
E-  Signal Ground ( A tied to E if panel is supplying voltage for current loop)

holgleos

what is the modification for use 0-10V

boutkan

If you have a 0-5 or 0-10 vdc input for tension the easiest way to bring it in is to use the AUX 1 BNC connector on the rear of the panel and change your Channel input to 6. LTEN=BASE,6
To use the tension connector you must  modify the USB 44 board, remove R14 and R19