Author Topic: Specs for tension input STIP  (Read 2363 times)

RossRolled

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Specs for tension input STIP
« on: June 15, 2014, 09:52:13 PM »
Hey,

looking for information on specifications for the tension input military type plug in the STIP, type, dimensions, that sort of thing.

I am looking to splice in tension from a Lee Specialties straight line counter head. 

Jerry

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 83
  • Karma: +0/-0
Re: Specs for tension input STIP
« Reply #1 on: June 16, 2014, 11:25:50 AM »
Panel is shipped to run with a 4-20ma input although modifications to the USB44 will let it run on a 0-10VDC input.
A - Signal return
B- signal input
D- +15V to power transduced
E-  Signal Ground ( A tied to E if panel is supplying voltage for current loop)

holgleos

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Specs for tension input STIP
« Reply #2 on: October 06, 2018, 01:17:33 PM »
what is the modification for use 0-10V

boutkan

  • Global Moderator
  • Newbie
  • *****
  • Posts: 2
  • Karma: +0/-0
Re: Specs for tension input STIP
« Reply #3 on: October 11, 2018, 08:49:02 AM »
If you have a 0-5 or 0-10 vdc input for tension the easiest way to bring it in is to use the AUX 1 BNC connector on the rear of the panel and change your Channel input to 6. LTEN=BASE,6
To use the tension connector you must  modify the USB 44 board, remove R14 and R19