Author Topic: No specification found for sensor "TEMP2" - PRT can't initialize  (Read 2643 times)

mawrick

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
I'v added the PRT as a "TEMP#2=ULD,TEMP2,4" in the service editor.

What will cause it to fail this initialisation, TEMP2 is specified as the sensor of PRT.

mawrick

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
Re: No specification found for sensor "TEMP2" - PRT can't initialize
« Reply #1 on: May 21, 2014, 08:14:44 AM »
Figured out the error. so disregard.